magicezy fiberglass repair products

Are MagicEzy repairs long-lasting?

Yes. MagicEzy products are designed to withstand the elements for years. The unique combination of ultra strong adhesion, flexibility and UV protection make our products supremely durable. In fact, we tested it against the leading gelcoat brands and MagicEzy was more than 5 times stronger. This is why we guarantee that MagicEzy repairs will last for at least 3 years.

Can you tell me which color to use for a particular model of boat?

Due to the fact that gelcoat can discolor quickly over time, it’s virtually impossible to give an accurate color recommendation that is based on the model of your boat.

The best thing for you to do is refer to our color chart and estimate the closest match.

If you purchase the wrong color, simply phone or email us, provide your receipt and we will send you the correct color free of charge.

The two most popular whites are Snow White (pure white) and Oyster White (creamy off white). If required, you can mix two or more colors together to form a new color. Mix on a clear plastic wrap on top of the surface and match to the color of your boat.

MagicEzy looks too good to be true. Does it really work?

Yes – Our goal is to provide you with an easy, inexpensive repair that is strong and durable and gives you that satisfaction from doing it yourself.

How do I get a smooth finish with MagicEzy 9 Second Chip Fix?

Gently skim the leveling device from the center of the chip toward the outer edge. Repeat on the opposite side so that the entire area has been leveled. The trick is to only make one or two passes.

If you’re not happy with how it looks, simply remove the product with a tissue and start again.

If you are still having trouble after a few attempts, try applying a piece of clear adhesive tape over the repair and remove after 48 hours.

How long does MagicEzy 9 Second Chip Fix take to cure?

Cure time can vary depending on the size of the repair and current weather conditions. If the temperature is expected to drop below 20°C / 70°F within 24 hours, blow dry the repair with a warm hairdryer for about 2 minutes after each coat. This will remove surface moisture and help the product cure.

MagicEzy products have ultra-strong adhesion that provides tough, long-lasting repairs. In order to achieve this strength, MagicEzy needs a little extra time to cure. Allow 48 hours before subjecting the repair to moisture or contact. MagicEzy will continue to strengthen and harden over the next 21 days.

Re-coat time: 2 hours (at 20°C / 70°F)

 

PRODUCT USAGE TIPS

MagicEzy 9 Second Chip Fix

The product doesn’t seem to be curing. Is there a problem?

MagicEzy products have ultra-strong adhesion that provides tough, long-lasting repairs. In order to achieve this strength, MagicEzy needs a little extra time to cure. Allow 48 hours before subjecting the repair to moisture or contact. MagicEzy will continue to strengthen and harden over the next 21 days.

IMPORTANT – If the temperature is expected to drop below 20°C / 70°F within 24 hours, blow dry the repair with a warm hairdryer for about 2 minutes after each coat.

You are using too much product at once:
For deep damage, apply in ¼ inch (6mm) layers. Allow each layer to DRY for 2 hours at 70ºF/20ºC before applying the next one.

How do I achieve a gloss finish?

You can achieve a glossy finish by applying a skim coat of Hairline Fix over the top of the cured 9 Second Chip Fix repair.

9 Second Chip Fix was very hard and did not flow out of the tube easily.

Prior to using, massage and rub the tube to loosen up the product inside.

MagicEzy Hairline Fix

I used Hairline Fix but it didn’t seem to fill the cracks. What am I doing wrong?

This occurs when there is a build-up of grime, dirt or wax in the crack. Before using Hairline Fix, remove contaminants by scraping a needle point through the crack. Then wash the area with soap and water and dry thoroughly.

The color of Hairline Fix appears to be incorrect when using for the first time.

Color separation can occur in products that have been sitting stationary for a while. To ensure even consistency, shake the tube vigorously for about 30 seconds prior to using.

 

magicezy colors, magicezy colours